超临界CO2回收线路板工艺研究

采用正交试验设计进行了超临界CO₂回收废弃印刷线路板的实验。以温度、压强、时间和夹带剂为实验因素，通过对实验前后样本在重量、厚度、弯曲强度和断裂强度四方面变化的分析考察了各实验因素对实验效果的影响。实验结果表明，影响超临界CO₂法回收印刷线路板的最主要因素为温度、时间和夹带剂，超临界CO₂法回收废弃印刷线路板的最佳工艺条件：温度270℃，压强大于7.38 MPa，时间3 h，夹带剂(水)160 mL。实验进一步验证了压强对实验结果的非显著性影响。     

优势菌的筛选及其强化活性污泥好氧反硝化的研究

利用含活性污泥提取物的贫培养基筛选SBR系统中的好氧异养优势菌。结合自然温度（15～20℃）、延长培养时间等条件来提高菌群的可培养性。从SBR活性污泥系统中分离出5种细菌。4株去除COD优势菌，1株异养硝化细菌，能在好氧条件下实现对总氮的去除。反应池底采用边缘对称曝气，反应池内细菌在时间顺序和空间位置上循环经历好氧过程及微氧过程。将PVA铝盐法固定的细菌对反应器进行生物强化。结果显示，在好氧工艺的条件下，投加优势菌群后，与未加优势菌群的反应器相比，可以显著改善污泥的沉降性能，COD、NH₃-N和TN降解率显著提高，分别达到98%、97%和90%。生物强化作用明显，反应器内具有良好的好氧反硝化环境。     

反硝化除磷菌驯化富集方式的探讨

以SBR反应器分别采用一段式和二段式培养方法对反硝化除磷菌进行了驯化富集.结果表明,一段式和二段式培养方法驯化完成后的活性污泥沉降性能均较好,污泥体积指数(SVI)分别约为60、50 mL/g,反硝化除磷菌占聚磷菌的比例达到了77%和71%.两种培养方法下反硝化除磷菌PO3-4-P去除率和脱氮率分别达到了97%和95%以上,缺氧结束时水中PO3-4-P质量浓度小于1 mg/L.驯化完成后污泥的含磷率最高达到了3.7%(质量分数).因此,采用一段式或二段式驯化方法均能实现反硝化除磷菌的有效富集.     

On Index System and Quantitative Assessment of Eco-cities： A Case Study on Urban Agglomeration of the Yangtze Delta

Urban agglomeration of the Yangtze Delta （UAYD）, one of the most developed regions of China, has witnessed an increasing prevalence in building ecological cities when the ecological cities are pursued by many modem cities, and great achievements have been made in this regard. It is inevitable, however, that certain problems exist during the construction of ecological city, which include but not limited to non-harmonious development of urban complex ecosystem, and the difficulty in quantifying eco-city construction or incomplete quantification in assessing the construction of present and future eco-city. Based on the analysis on social-economic conditions and regional conditions of the UAYD, this paper attempts to set up an index system of eco-cities combining with local characteristics, and to adopt the indices of eco-city, urban harmony, and eco-city colligate to evaluate the ecological level, urban harmonious development and eco-city construction of cities within the UAYD. Results indicate that among 15 cities in UAYD, Suzhou City ranks the highest in terms of eco-city construction, whereas Nantong ranks relatively lower; sustainable eco-city construction is possible only when cities are developed in every respect of harmony.     

Thermal conversion of rice husks and sawdust to liquid fuel

The paper focuses on studying the conversion of rice husks and sawdust into liquid fuel. Rice husks, sawdust and their mixture are pyrolyzed at temperatures between 420 and 540 degrees C, and the main product of liquid fuel is obtained. The experimental result shows that the yield of liquid fuel depends on various factors such as feedstock and temperature. The maximum yields for rice husks, sawdust and their mixture are 56%, 61% and 60% at 465, 490 and 475 degrees C, respectively. Analyses with GC-MS and other apparatus show that the liquid fuel is a complicated compound with low caloric value and can be directly used as a fuel oil for combustion in a boiler or a furnace without any upgrading. Alternatively, the fuel can be refined to be used by vehicles.     

Industrial Cluster Upgradation of Regenerated Resources in Miluo City

With China's rapid economic growth, ecological construction and environmental protection become increasingly important. The regenerated resources industry is an effective way to solve problems, such as resources depletion, energy shortage, and pollution, and it also has strategic importance for the construction of a resource-conserving and environment-friendly society. The regenerated resources industry has been established in Miluo for long time, which includes a recycling system, a processing and utilization system, and a refuse decontamination system. An industrial cluster is in its early stage of development. In order to solve current problems, such as short industrial chain, low processing rate, and low added value, the industrial cluster should be dynamically upgraded by means of technology innovation, chain nucleus creation, and chain extension. We think the industrial cluster of regenerated resources will become a local brand for Miluo, from which other regions or cities will gain valuable experiences and inspirations.     

A directional passive air sampler for monitoring polycyclic aromatic hydrocarbons (PAHs) in air mass

A passive air sampler was developed for collecting polycyclic aromatic hydrocarbons (PAHs) in air mass from various directions. The airflow velocity within the sampler was assessed for its responses to ambient wind speed and direction. The sampler was examined for trapped particles, evaluated quantitatively for influence of airflow velocity and temperature on PAH uptake, examined for PAH uptake kinetics, calibrated against active sampling, and finally tested in the field. The airflow volume passing the sampler was linearly proportional to ambient wind speed and sensitive to wind direction. The uptake rate for an individual PAH was a function of airflow velocity, temperature and the octanol-air partitioning coefficient of the PAH. For all PAHs with more than two rings, the passive sampler operated in a linear uptake phase for three weeks. Different PAH concentrations were obtained in air masses from different directions in the field test.     

应用陶粒过滤-陶瓷膜组合对止咳糖浆制药废水深度处理的试验研究

止咳精浆制药废水经生物接触氧化一体化废水处理装置处理后,其出水中COD、BOD和氨氮等主要污染物质均不能达标排放.在实验室中采用陶粒过滤-陶瓷膜组合对经一体化处理装置处理后的制药废水进行深度处理,在陶粒柱反应器选用粒径为1～2 mm的陶粒滤料,陶瓷膜反应器选用孔径为2～3/μm陶瓷膜的条件下对水样进行测试.废水经陶粒过滤-陶瓷膜组合处理后,其BOD、COD、SS和氨氮指标均可稳定达标排放.     

压力式接触氧化法同步硝化反硝化脱氮性能研究

研究了压力式接触氧化法的脱氮性能,分析了容积负荷、溶解氧和停留时间等因素对反应器脱氮效果的影响.研究表明,压力式接触氧化法具有明显的同步硝化反硝化现象,当HRT=1.8 h时,DO高达5.4 mg/L,可获得90%以上的反硝化率.当HRT=1.8 h,溶解氧4～5 mg/L,容积负荷为10～12 kg COD/(m3·d)时,氨氮去除率80%左右,总氮去除率达70%～80%.     

Modification of ferrite–manganese oxide sorbent by doping with cerium oxide

Fe–Mn oxide and Ce-doped Fe–Mn oxide sorbents were studied on the structural and desulfurization behavior in COS removal from syngas. The effects of cerium oxide on the Fe–Mn oxides have been investigated by XRD, BET, TPR, XPS and TEM methods. Analysis data show that the Ce-doped sorbent has larger specific surface area and better particles’ dispersion compared with non-modified Fe–Mn sorbent. The addition of Ce improves the reduction performance of Fe–Mn species. The desulfurization experiments show that the desulfurization activity of sorbent can be increased because of the promotion of the structural and redox properties by ceria doped. The Ce-doped sorbent can reduce COS from 15,000 ppmv to less than 0.1 ppmv at 325 °C and a space velocity of 1000 h⁻¹.